Crop spraying technology guide

Not all droplets are created equal.

It is not just the machine name that changes: the way it works changes too. The right choice depends on the crop, canopy volume, whether you work in rows or broadacre crops, and how much operating autonomy you need throughout the day.

Before choosing

Three questions that clarify everything.

To identify the most suitable machine, the atomisation principle alone is not enough. You also need to consider the crop, the intended application volume, and whether the work takes place within the crop, along a row or across a broadacre field.

1

What type of application do you need?

Some machines use pressure nozzles, others use pneumatic diffusers, and others use booms. This changes how the spray liquid is delivered and, consequently, how it reaches the target.

2

What type of crop do you need to treat?

A tall, wide canopy calls for a different approach from a uniform row or a low-growing broadacre crop. The training system helps determine the right choice.

3

How important is work organisation?

If you need greater autonomy, fewer refilling stops or the ability to work without entering the crop, the choice of machine changes considerably.

The five machine families

One objective, different operating solutions.

These machine families differ not only in their spray application technology. They also vary in their ideal crops, water volumes, operating autonomy, crop access and working method.

Pressure + fan

Airblast sprayer

The classic choice for large canopies, conventional treatments and maximum versatility.

An airblast sprayer is often the natural choice for tall, large or irregular canopies, including orchards, olive groves and many vineyards. It uses hydraulic nozzles for pressure atomisation and a fan to carry the spray: it generally applies higher spray volumes than pneumatic mist blowers and provides a well-established, highly adaptable solution.

Why choose itFor thorough coverage of wide, tall or irregular canopies with a highly versatile machine.
Ideal cropsOrchards, olive groves and plantations where canopy volume is a key factor.
Application volumeUsually medium to high: greater coverage, but also more refilling stops.
Practical benefitRecommended for fields with varying levels of crop vigour.
Large canopiesOrchardsOlive grovesVineyardsMedium-high volume
Explore IDEAL airblast sprayers →
High-velocity air

Pneumatic mist blower

The ideal low-volume solution when autonomy, productivity and uniform rows matter.

A pneumatic mist blower is often preferred for more uniform crop walls when the aim is to reduce water use per hectare. High-velocity air works with pneumatic diffusers to produce an extremely fine spray, improving treatment coverage, reducing refilling stops and increasing the area that can be treated in a day.

Why choose itFor low-volume spraying with greater operating autonomy.
Ideal cropsUniform rows and crop walls where pneumatic spray application performs at its best.
Application volumeLess water per hectare and fewer refilling stops.
Practical benefitCovers more hectares per day when operational efficiency is a priority.
Low volumeUniform rowsVineyardsOrchardsGreater autonomy
Explore IDEAL pneumatic mist blowers →
Pneumatic spraying + recovery

Recovery mist blower

Designed for vineyard spraying while helping to reduce environmental contamination.

The recovery mist blower is designed for well-defined rows. Two opposing panels deliver the spray and capture the portion that is not deposited on the crop, returning it to the tank. It is the most suitable choice when low-volume spraying must be combined with drift reduction, less waste and greater process control.

Why choose itTo reduce off-target losses and recover part of the spray not retained by the crop.
Ideal cropsUniform rows, especially in vineyards, where the panels can operate effectively.
Work organisationRequires row geometry that is compatible with the machine’s passage.
Drop Save dataDeclared average seasonal recovery of 50%.
VineyardsUniform rowsLow volumeSpray recovery
Explore Drop Save and recovery systems →
Actual recovery varies throughout the season depending on canopy management and operating conditions.
Nozzles distributed along the boom

Boom sprayer

The right machine family when the target is not a tree canopy but a broadacre crop.

A boom sprayer uses nozzles positioned across the full width of the boom. It is the logical choice for cereals, vegetables, weed control and open-field crops where uniform transverse distribution is essential.

Why choose itFor highly uniform application across wide areas and low-growing crops.
Ideal cropsCereals, vegetables, row crops and broadacre crops.
Application volumeVaries considerably according to nozzle selection and application target.
Practical benefitThe right choice for crop protection and foliar nutrition across broadacre crops.
BroadacreCerealsVegetablesWeed controlBoom
Explore IDEAL boom sprayers →
Adjustable spray head

Cannon sprayer

Choose it when droplet formation is not the only issue: the machine may be unable to enter the treatment area, as in greenhouses and tunnels, or the target may be a long way off, such as tall trees or buildings requiring sanitisation.

A cannon sprayer is the solution to consider when the target must be reached from a long distance or when the crop is very tall, dense or difficult to approach. Its defining feature is the adjustable spray head: atomisation may be hydraulic or pneumatic depending on the model, but long-range application is the key operating principle.

Why choose itFor spraying from a distance, at height or from outside the crop.
Ideal cropsTall trees, greenhouses, maize or plantations that are difficult to reach.
Atomisation systemHydraulic or pneumatic atomisation, depending on the model.
Practical benefitReaches targets that are difficult to cover with other machines.
Long rangeTall treesGreenhousesMaizeDistance
Explore IDEAL cannon sprayers →
“Sprayer” is a general term for crop spraying equipment; on this page, “cannon sprayer” identifies the family of long-range sprayers.
Quick comparison

Everything in one table.

This practical comparison considers not only the operating principle, but also the crop type and the real-world reasons why a farm may choose one machine over another.

TechnologyPrincipleIdeal cropsWhen to choose itDefining feature
Airblast sprayerHydraulic nozzles: pressure forms the droplets and the fan carries them to the target.Tall, wide or irregular canopies.When versatility and a conventional approach to tree crops are required.Usually operates at medium to high application volumes.
Pneumatic mist blowerPneumatic diffusers: air atomises and distributes the spray.More uniform rows and crop walls.When low volume, autonomy and more hectares treated per day are priorities.Extremely fine droplets and fewer refilling stops.
Recovery systemPneumatic spraying with panels that capture spray not deposited on the crop.Uniform rows, especially in vineyards.When you want to spray and recover part of the mixture that passes beyond the row.Reduced waste and improved drift control.
Boom sprayerBoom-mounted nozzles for wide, uniform distribution.Low-growing and broadacre crops.When the target is a field surface rather than a tree canopy.Uniform transverse distribution across wide working widths.
Cannon sprayerAdjustable spray head; the atomisation system depends on the model.Tall, dense or hard-to-reach crops.When spraying must be carried out from a distance or from outside the crop.Adjustable long-range application.

Useful note: low volume is not a machine family. It is an application method. The correct comparison is therefore between machine types, while the final choice also depends on the desired application volume, crop, farm organisation and target droplet size.

Selection guide

Where should you start?

Start with one simple question: are you treating a canopy, a crop row, a broadacre field or a target that must be reached from a distance? This will clarify almost all the key differences.

01

Are the canopies wide, tall or irregular?

For large, variable canopies, an airblast sprayer is often the natural choice.

Airblast sprayer
02

Do you work with uniform rows and want fewer refilling stops?

A pneumatic mist blower is the leading option when low volume and daily productivity are priorities.

Pneumatic mist blower
03

Do you also want to recover spray that passes beyond the vineyard row?

If recovery is part of the strategy, choose a recovery spraying system.

Recovery system
04

Is the target a low-growing or broadacre crop?

In this case, the right choice is a boom sprayer rather than an airblast sprayer or pneumatic mist blower.

Boom sprayer
05

Are you unable to enter the crop, or do you need to spray from a distance?

When range is the deciding factor, a cannon sprayer is the most suitable solution.

Cannon sprayer
Frequently asked questions

The differences, without unnecessary jargon.

The questions below explain not only how each machine works, but above all when it makes sense to choose it.

What is the practical difference between an airblast sprayer and a pneumatic mist blower?
In practice, an airblast sprayer is often preferred for larger or more variable canopies and conventional application volumes. A pneumatic mist blower is ideal for low-volume spraying and is particularly effective in uniform rows when the aim is to cover more hectares with less water.
When does a recovery mist blower make sense?
Primarily in vineyards with well-defined rows, when the aim is not only to spray but also to recover part of the mixture that passes through the canopy, reducing waste and drift.
Does a boom sprayer replace an airblast sprayer or pneumatic mist blower?
Usually not, because it meets a different requirement. A boom sprayer is the right family for broadacre or low-growing crops; for application within a tree canopy, the choice is between an airblast sprayer and a pneumatic mist blower.
Is a cannon sprayer a technology in its own right?
Rather than a single technology, it is an operating configuration. It is used when long range, height or spraying from outside the crop is required; atomisation may be hydraulic or pneumatic.
Is a mounted or trailed machine better?
It depends on the area to be treated, manoeuvrability, tractor power and required autonomy. In general, a mounted machine prioritises agility and compactness, while a trailed machine provides a larger tank and fewer refilling stops.

The right technology starts with the crop.

Start with the crop type, application volume and how you want to organise the working day. Then use the IDEAL configurator or speak to our team to identify the most suitable model.